成人免费视频欧洲-成人免费视频软件网站-成人免费视频视-成人免费视频一-成人免费视频一区二区-成人免费视频在线播

Cooler typeSteam -seal cooler生產廠家型號規格
Your location : Home > Product > Cooler type
Steam -seal cooler
Steam -seal cooler
Steam -seal cooler
Steam -seal cooler

Steam -seal cooler

The role of a steam -seal cooler is to make the tram from the steam turbine slightly negative pressure, so that the auto continuously enters the auto seal cooler through the auto pipeline and condenses it into water for the boiler to use it.
Online inquiry
上一產品 : Tubular oil cooler
下一產品 : Sampling cooler
  • Content details

Introduction to the Cooling Cooling Cooling:


The role of a steam-seal cooler is to make the turbine-rear steam seal-trains slightly negative pressure, and the-steam pipes continue to enter the auto seal cooler through-steam pipelines and condense it into water for reuse of the boiler.


The knot of the auto seal cooler-and material:

 

The auto seal cooler is a surface heat exchanger, a horizontal knot-, consisting of water chamber and shell, shell material: carbon steel or stainless steel, pipe materials: stainless steel pipe, copper pipe, etc.


Auto seal cooler knot-:


The water exchanger water side of the auto seal cooler uses four process knots-, its cooling water-enter the water room from the water inlet of the water seal cooler, and then flow into the tube of the shell-when the cooling water is in the heat exchange pipe When flowing, heat exchange with steam in the shell (steam side). Cooling water absorbs a large amount of steam condensation heat, rising water temperature,-later enter the export water room, and overflows the auto seal cooling through cooling water exports. Instrument. The steam from the turbine-rear axis seal, through-auto pipeline, enters the inside of the shell from the auto-seal-seal-seal-entrance. The diversion of the steam flowing through the interval between the interval is constantly flowing between the heat exchange pipes of the tube, and the heat exchange is performed. When most of the steam passes through the outer wall of the heat exchange pipe, it releases a large amount of heat and condenses into water. Excessary from the hydrophobic port and enter the hydrophobic pipeline. Because-steam-some of the air that cannot be condensed, in order to make-steam continuously pass-auto pipelines and enter the auto seal cooler, you need to pull out the gas, and through the steam injection, the air and residual steam are discharged to the atmosphere.


Step installation steps for auto seal cooler:


1. -Can the base of the vapor sealing the cooler is qualified and clean up the foundation surface.

2. Hall out of the auto seal cooler on the basis, adjust the level and elevation position.

3.-Check the location of the cooling device and whether the interface position is correct.

4. Fixed equipment (secondary pouring).

5. Connect the pipeline and electricity-.


Precautions for the installation of auto seal cooler:


1. The equipment should be placed on the flat venue.

2. When hanging, the second-sided steel wire rope is on the outside of the equipment support, and the force is uniform.

3. Equipment should be avoided-the effects of external or external torque.

4. When connecting the pipeline, consider the displacement of the device and the displacement of the pipeline. All interfaces (including valves, instruments, instruments, etc.) should be cleaned up. Disassembly seal (including sundries such as steel plates, cardboards, etc.) should be removed to prevent the pipe port from blocking the mouth.

5. Electric-parameter requirements.

6. Start operation-, the whole system-to be cleaned to prevent the blockage and (or) damage of certain equipment, the pipeline-should consider the use of filters.

7. All takeover-the cover should be uniform-seal to prevent leakage.

8. Tie-conduct-seal-test and eliminate leakage-.

9. Rehabilitation, installation instrument, instrument.


Starting and shutdown:


The operation of the auto seal cooler should pay attention to the following basic steps:

1. British-the exhaust pipe is unblocked-block.

2. The condensate water and hydrophobic pipeline of the cooler should be unblocked.

3. Turn on the cooling water into/outlet valve so that the cooling water circulates in the cooler.

4. Open the auto seal cooler into the steam valve and start the injection.

5. In order to protect the cooling tube of the cooling cooler, the pump should be parked in the auto seal cooler















汽封加熱器型號
QF-8
QF-8/10
QF-10/12
QF-10/12
QF-14
QF-17
QF-25
QF-30
QF-45
QF-65
QF-70
加熱面積m2
8
18
22
30
14
17
25
30
45
65
70
水測壓力MPa
0.392
0.392
0.392
0.392
0.588
1.372
1.47
0.98
2.45
1.57
2.45
汽測壓力MPa
0.49
0.588
1.176
1.57
0.093
0.093
0.093
0.095
0.088
0.073
0.093
管徑外/內(mm)
15/13
15/13
15/13
16/13
15/13
16/14
19/17
15/13
19/17
16/14
19/17
設備-量t
0.43
0.52
0.67
0.84
0.5
0.8
1.2
0.71
1.6
2.0
2.1


產品動態

Steam -seal cooler生產廠家Copyright ? 2012-2023 Lianyungang Lingdong Electromechanical Equipment Co., Ltd all rights reserved

Tel

0518-85370171

主站蜘蛛池模板: 有码高清中文字幕一区二区三区 | 亚洲阿v天堂2025国产 | 国产高清精品亚洲一区二区三区 | 国产精品福利在线观看免费 | 精品影片在 | 亚洲色欲一区二区三区在线观看 | 国产精品午夜福利不卡 | 91视频官方下载 | 精品无码一区二区在线观看 | 日韩高清va视频 | 国产在线98视频播放 | 精品国产亚洲av麻豆映画 | 91久久精品蜜臀中文字幕TV | 99久久综合狠狠综 | 日本在线播放高清免费国产 | 2025最新国产精品网站 | 国产精品成人免费一 | av看片资源 | 偷拍不雅视频一区二区三区 | 亚i洲av第ニ区国产精品 | 涩涩亚洲 | 免费观看全黄做爰大片男男 | 无码人妻无 | 欧美三级在线播放网站 | 一二三亚洲成人影院 | 91欧美精品一区二区在线 | 国产v亚洲v天堂无码卡通 | 国产麻豆五区六区视频 | 亚洲一区二区精美在线观看av | 国产欧美亚洲精品一区 | 一区二区91足控脚交喷水 | 国产人成视频在线观看 | 色综合天天综合网 | 国产成人aV无码永久免费一线天 | 国产日产久久高清欧美一区ww | 国内三级电影手机在线 | 亚洲人成影院在线观看 | 国产精品一区二区三区线一牛影视 | 中文字幕人妻互换av久久 | 亚洲不卡中文字幕无码的影片 | 九九精品手机视频在线观看 |